To order a free catalog | Click here |

To buy AMSOIL products, visit the AMSOIL Online Store

| Buy AMSOIL at wholesale prices |

Buy AMSOIL By Phone from AMSOIL Headquarters
7am-5pm Central Time, Toll-Free at: 1-800-777-7094
Give Operator Sponsor # 504006
For Fastest Service

Hayes Diversified Technologies

AMSOIL sponsored Driver Attempts World Speed Record

The Bonneville Salt Flats International Speedway in Tooele County, Utah, hosts the fastest vehicles in the world every year as people from all walks of life attempt record-setting speed in various motorized vehicles. This year (2007) AMSOIL was represented by Fred Hayes on his HDT USA diesel motorcycles.

HDT USA/Fred Haynes
Fred Hayes currently holds eight world and four national land speed records on motorcycles. At the Salt Flats, he attempted to better those records and add another - all on diesel-powered bikes.

Fred Hayes
Hayes is an experienced motorcycle rider, earning top honors in several American motorcycle riding competitions through the years. In 2003, Hayes was awarded a platinum medal at the UK National Rally, the competition's highest award. Since then Hayes has ridden two HDT USA diesel motorcycles to the first recognized land speed records for diesel motorcycles.

Hayes' experience with motorcycles goes far beyond competition, though. He has been with Hayes Diversified Technologies (HDT USA) since the company's beginning in 1961 and has led the company to become the largest supplier of military motorcycles to the U.S. Defense Department. Hayes is HDT's President, CEO and Chief Engineer. In addition, Hayes was a primary consultant to the Motorcycle Safety Foundation and the U.S. Marine Corps during the development of the Marine Corps' Military Motorcycle Operator Training Course and still holds credentials as a Military Motorcycle Chief Instructor. In short, Hayes knows motorcycles. He builds them and rides them, and does both in a superior fashion.

Hayed Diversified Technologies
HDT USA develops and manufactures motorcycles for the U.S. Defense Department. The company is known for its advanced technology, superior engineering and revolutionary motorcycle design, but HDT began as something totally different. Throughout the 1960s and 1970s, HDT specialized in the development and manufacture of electro-mechanical switches and relays for defense and aerospace. The company was the original equipment manufacturer (OEM) for major defense companies like Lockheed, Boeing, Control Data and Unisys. In 1970, HDT expanded into commercial motorcycle sales, selling and racing PENTON Sport Cycles under the trade name METTCO. From 1976 through 1979, HDT was employed as a consulting firm to Honda's off-road racing and enduro teams. HDT produced suspension components and provided two-stroke engine performance modifications for Honda from 1977 through 1979.

In 1981, HDT used its unique combination of expertise in government contracting and off-road motorcycle development to place a winning bid to produce tactical military motorcycles for the U. S.Army. Since then, HDT USA has been awarded more than 45 contracts, resulting in over 2500 military motorcycles being delivered to the U.S. and allied military forces. HDT's M1030B1 Marine Corps motorcycle is known as the best performing, most reliable tactical military motorcycle now in service with any military organization, beating out competitive motorcycles from BMW and KTM.

"Single Battlefield Fuel"
In 1984, all NATO military forces adopted a long term goal of employing a single battlefield fuel to reduce the logistics burden of supplying gasoline, diesel, aviation gasoline and aviation kerosene. Years later, the U.S. Navy announced they would not supply or transport gasoline in any form, only heavy fuels such as diesel and jet fuel. The only equipment still operating on gas was small field generator sets and motorcycles. The military approached several motorcycle manufacturers to determine what options were available as alternatives to gas powered bikes. All of these manufactures claimed that a diesel fueled motorcycle was neither commercially practical, cost effective, nor, in some cases, even possible given the performance requirements. After requesting proposals from all interested sources, the U.S. Marine Corps found the answer at HDT USA. In May 2001, HDT unveiled the first motorcycle powered by a diesel engine that was designed specifically for motorcycles.

The Search for a More Durable Oil
Because HDT motorcycles are made for the military, their engines and the oil that protects them must withstand much more rigorous testing and use than the average bike. "The military does not perform a civilian-type break-in; that's not how they use their vehicles," said Hayes. These motorcycles are operated in every kind of severe condition imaginable, from the ice and cold mountainous regions to the sand and heat of the Iraqi desert. They run hard, and breaking down in the heat of battle should be the last thing on a soldier's mind. These severe conditions dictate that the oil be able to flow readily in sub-zero temperatures to quickly lubricate moving parts, yet stay viscous enough to cool and protect in extreme heat.

HDT was servicing their motorcycles with Mobil Delvac 1 5W-40 and using Mobil 0W-30 racing oil for their race engines. Mobil's 0W-30 is not diesel rated or recommended for motorcycle wet clutch applications. "We have seen for several years that our engines 'like' the lighter oils, especially during initial run-in," said Hayes. "This has been especially evident when we look at camshaft and rod bearings after a new engine has bee run very hard with no run-in," HDT has been using Mobil 1 for three years, finding it was superior to conventional diesel oil, but they were having problems with blow-by.

Impressive Results
Hayes said HDT was drawn to AMSOIL because of the availability of AMSOIL 0W-20 Synthetic Motor Oil and Synthetic 5W-30 Heavy Duty Diesel Oil. "We noticed an increase in horsepower right away as compared to Delvac 1," said Hayes. "But what was quite surprising was the condition of an engine after a 50-mile run-in and over 120 full throttle dyno runs. The camshaft bearings, the small and large end rod bearings didn't even look like they had been run. During that series of dyno runs, we registered the highest horsepower and torque readings ever." Hayes said their testing proved that AMSOIL Synthetic 5W-30 Heavy Duty Diesel Oil provided better cam bearing lubrication, better transmission operation and less blow-by than their previous oil. "We picked up just over one horsepower at the rear wheel," he said. "In addition, it appears that overall coolant temperature was down about five degrees."

Hayes said AMSOIL provides superior performance in the two areas that matter to him most: horsepower and lubrication, especially in new engines. At start-up, the exhaust cams are the last components the oil reaches. Because the military doesn't break in their vehicles like civilians do, and they typically don't have time to allow a warm-up period, it is vital that the engine oil is able to flow immediately. For this reason, HDT takes their engines straight to the dyno with no break-in, and they run wide open.

"The lubrication to the exhaust cams was really good," said Hayes. "They looked beautiful."

Commercially Available Motorcycles
HDT USA is working on development of commercially available motorcycles, tentatively scheduled for release by early 2008. The company is so impressed with AMSOIL that these motorcycles will come factory-filled with AMSOIL synthetic lubricants. This quote from HDT's website sums up their experience with AMSOIL: "With over a year of testing, we have found that AMSOIL products continually outperform all other lubricants. AMSOIL provides improved performance, increased fuel economy, lower oil consumption and significantly reduced engine wear in all operating conditions."

Bonneville Results
The weather did not cooperate with Hayes and his attempt to set new records, but eventually he was able to set two new national and international records. In the 750 MPS-D class (modified partial streamlining, diesel powered, 750 max. displacement) Hayes set a new record of 103.3215 mph. The old record was 101.617 mph. Hayes also set a new record in the MPS-DB 750 class (modified partial streamlining, diesel-powered, 750 max. displacement) of 110.4325, easily beating the old 105.147 record. All records are certified official by the American Motorcyclist Association (AMA). Unfortunately, due to the inclement weather and repeated track delays, they were unable to make all the runs necessary to set any other records.

AMSOIL Synthetic Motorcycle Oil

AMSOIL Motorcycle Air Filters

AMSOIL Motorcycle Oil Filters

AMSOIL Motorcycle Fork Fluids

Harley Davidson Owners Choose AMSOIL

Premium AMSOIL Synthetic Motor Oils offer the longest drain intervals on the market, unsurpassed protection and performance that effectively extends equipment life and improved fuel economy, saving customers money at the pump and reducing the nation’s dependence on foreign oil.

"AMSOIL INC. warrants that the use of its lubricants will not cause mechanical damage to any mechanically sound equipment when AMSOIL INC. products are used in full compliance with the company's recommendations and instructions."

FULL WARRANTY

AMSOIL synthetic motor oils are formulated to surpass engine test specifications, offering protection far greater than competing motor oils for extended drain intervals. Most synthetic oil manufacturers make no claim to extended drain intervals, deferring to the maintenance schedule provided by the vehicle manufacturer. With its unparalleled oil and warranty program, AMSOIL offers consumers unprecedented protection and economics.

Another AMSOIL First

More than 20 years ago, AMSOIL began using the NOACK volatility test as a comparison tool and measurement of quality. Back then, nearly every oil tested side-by-side with AMSOIL synthetic motor oils failed, and those that passed barely squeaked by. Other oil companies paid no attention to NOACK results until Ford Motor Company made it a requirement for service fill oils, validating what AMSOIL had said all along.

AMSOIL Now An ISO Certified Manufacturer
AMSOIL recently received ISO 9001:2000 certification of our Quality Management System (QMS). NSF International Strategic Registrations is the registrar that has verified our QMS meets the requirements of the ISO 9001:2000 standard, the most widely utilized quality standard throughout the world for quality management systems. ISO standards are used by over 300,000 companies worldwide setting rigorous standards for businesses, government and industry.

ISO 9001:2000 is applicable to any manufacturing and service organization providing a framework for system development that focuses on the customer, quality system performance and ongoing improvement. AMSOIL received ISO 9001:2000 registration under the scope: synthetic lubricants blending, packaging, and other fulfillment directly associated with lubricant product.

The ISO certification puts AMSOIL in line with some of the most efficient companies in the world. It is further assurance that the products and services AMSOIL provides will continue to maintain the high level of quality the company always demanded.

Which AMSOIL Products Are Recommended For Your Car or Truck?
| Click Here And Enter Your Vehicle Information To Find Out |

Click It, Print It, and Mail It

| Printable Dealer Application |

Mail your completed dealer application to:
AMSOIL Inc., AMSOIL Building, Superior, WI 54880.

Register to receive valuable WHOLESALE PRICING information and AMSOIL product updates by email

I welcome the opportunity to work with you personally as your servicing AMSOIL Dealer. Use the information on this website to contact me. You may also check out the AMSOIL Corporate Website for product and business opportunity information.

If you would like more information about AMSOIL INC., click one of the links below:

• To Request a Free Product Catalog

• For information On Becoming a Dealer

• AMSOIL Online Product Application Guide

• To Buy AMSOIL Products in the AMSOIL Online Store

• To Sell AMSOIL in Your Store or Purchase For Use In Your Equipment